Pry-Cam es un instrumento portátil para la adquisición, procesamiento y clasificación automáticos de señales PD.
Adquiere el campo electromagnético producido por cada pulso PD individual sin interrupción del servicio.
SISTEMA DE ADQUISICIÓN EXACTO
200 mega muestras / segundo
Ancho de banda de 100 MHz
SENSOR INALÁMBRICO PATENTADO CON DOS SALIDAS
Patrón de PD, con forma de onda y espectro de frecuencia de cada pulso de PD
Sincronización AC con tensión de alimentación
Aspectos Técnicos:
-
SENSOR
Type
Electromagnetic, based on a patented Ultra Wide Band antenna, also providing AC synch signal
Bandwidth
100 MHz with filter for FM band
PD sensitivity
Down to 1pC
Synch sensitivity
Down to about 150 VAC (at 10 cm)
Synch frequency
From 10 Hz to 1 kHz
Working range
From 1 cm up to 200 cm (depending on the PD activity level)
Power supply
3.3 V, 40 mA [internal]
Weight
About 80g [internal]
Dimensions
70 mm x 70 mm x 70 mm LxWxH [internal]
-
ACQUISITION UNIT
Sampling frequency
200 MS/s
Resolution
8 bit
Bandwidth
100 MHz
Gain
From 0 dB to 40 dB
Trigger
Digital, fully configurable
Synch resolution
16 bit (5.6 μs)
PD channel
50 Ohm, 1.5 Vpp (overvoltage protected) [internal]
Synch channel
1 Mohm, 5 V (overvoltage protected, optional) [internal]
Processing
Real-time filtering capabilities, ultra-precise time stamping (°5 ns resolution)
Repetition rate - full pulse waveform
10,000 pps (about 8000 pps over WiFi)
Repetition rate - only pattern
up to 50,000 pps
Interfaces
WiFi 802.11b/g, data rate > 54Mbps
Remote synch
Wireless RF interface @ 868MHz (optional)
Working mode
Local, remote and monitoring
Power supply
12 V, 200 mA
Backup battery
Li-Po 7.4 V, 2200 mAh
Autonomy in battery mode
Approx. 6 hours
Weight
About 400g (depending on options)
Working Temperature
From -25°C to 70°C
Dimensions
160 mm x 120 mm x 130 mm LxWxH
Case
Rugged ABS plastic with IP67 protection rating
